Monofacial Modules
Solactra-Monofacial Module
Bifacial Modules
Solactra-Home Solar

PERC Technology


The PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.
Wiseo-DMS Intelligent Workflow
Wiseo-DMS Security

Bifacial PERC

For a bifacial PERC cell, the Al back surface field is replaced by Al grid, hence render the majority of rear side transparent which enable the cell to absorb light and generate electricity from both sides.

High Energy Yield

Outstanding low irradiance performance, low power-temperature coefficient, low operating temperature, all these technologies lead to a high energy yield.
Wiseo-DMS Intelligent Workflow
Wiseo-DMS Security


Based on the advanced mono wafer and anti-LID technology, our panels offer a first-year power warranty of ≥98% for PV modules.
Solactra-MontDose Compatible with your TPS
Cell Efficiency in Mass Production
Solactra-MontDose Compatible with your TPS
1st Year Degradation, Anti-LID
Solactra-MontDose Compatible with your TPS
Outstanding Low Irradiance Performance
Solactra-MontDose Compatible with your TPS
Low Power Temperature Coefficient

Bifacial Power Generation

The energy yield of bifacial module can be influenced by albedo, height of module, GCR and DHI etc. Installation height of bifacial module is recommended to be higher than 1m. Shading from bracket and junction box should be avoided. At present, the power generation of bifacial module on fixed brackets and single axis tracker can be simulated with PVsyst. Investors can determine the DC/AC ratio of bifacial module system to minimize the LCOE.

Wiseo-DMS Intelligent Workflow

Half-cut Technology

Half-cut cell technology is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module’s power increases by 2%. The reliability of module is also enhanced.
The combination of half-cut cell technology and bifacial module can amplify the gain over the effect of current-reduction.
Wiseo-DMS Intelligent Workflow
Wiseo-DMS Security

Lower Hot Spot Temperature

In field applications, small area shadings can cause the temperature of those parts extremely high. This phenomena is called hot spot. The long duration of hot spot could bring irreversible degradation of modules.
Because the string current of half-cell modules is half of full-cell modules, the hot spot temperature can be obviously reduced.

Lower Operating Temperature

Half-cut cells have half of the working current, thereby the thermal loss is remarkably reduced. Operating temperature correspondingly decreases, and the reliability of module is improved as well as power gain.
Wiseo-DMS Intelligent Workflow
Wiseo-DMS Security

Lower Shading Loss

Because of the unique parallel connection design, half-cell modules still have 50% power output under the circumstance of array shading in sunrise or sunset when portrait installation.
In addition, half-cut technology can improve the output of bifacial module under non-uniform incident illumination on the backside.

Higher Energy Yield Under High Irradiation Condition

Under high irradiation conditions, half-cell module, especially bifacial half-cell module, will have a higher energy yield compared with conventional module. Bifacial half-cell module will help to achieve the lowest LCOE in regions which is rich in sun radiation resources.
Wiseo-DMS Intelligent Workflow